How to judge the quality of embroidery products

How to judge the quality of embroidery products

1. the bottom line is debugged smoothly, the product looks smooth and plain, and the bottom line shall account for 1/3 of the total width of the flat needle.

2. the pattern needle method should be applied properly, and the lines should be round and smooth and thick and fine.

3. the surface line shall be trimmed and the plain and waxy paper shall be torn off, and the bottom line shall be kept 5-8mm in length.

4. ensure the cutting height is clean and free from stains.

5. the color line, position, front and back side and pattern shall be correct according to the customer board.

6. after the pattern design is completed, it is necessary to check the rationality and perfection of the pattern to ensure the production progress and product quality.

6-1. angle, level, center and verticality of flower type.

6-2. the overall pattern and the size proportion of embroidery objects one by one.

6-3. rationalization of the color sequence of embroidery objects.

6-4. the needle trace position of flower type, the thickness and thickness of the flat needle and the density of the stitch spacing.

6-5. check whether the needle starting point of flower type and flower position is consistent.

6-6. setting of stitch angle and entrance and exit of embroidery object.

6-7. the attributes of embroidery objects and the cutting and connecting conditions between embroidery objects.

6-8. needle receiving relaxation at the end of embroidery object.

6-9. cancel the stitch length of the flower type smaller than 0.5mm to reduce the broken thread probability in embroidery production.

6-10. the relationship between the properties of the cutting (plush length, fabric elasticity, cloth thickness) and embroidery pattern shall be fully considered, and the best embroidery effect can be expressed with the least stitch marks.